MENU

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that caused the selection of a material group to have no effect when editing pieces or stock.
• Fixed a bug that caused the best solution criterion selected in the configuration wizard to be overwritten.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an issue that, under specific circumstances, could incorrectly describe cuts in printouts.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Moved stackSize from Material to StockItem.
• Added default stack size (defStackSize) in Material.
• Changed element priorities to numeric values.
• Fixed an issue that, under certain circumstances, could cause optimization to never finish.
• Changed the meaning of quantity in StockItem when stack cutting is used. In this case, quantity refers to the number of stacks.
• Improved handling of a large number of variants during optimization.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Stack cutting configuration moved to stock.
• Added the option to disable project and stock statistics. With a large number of pieces or stock, generating statistics can be very time-consuming, making it difficult to work with the program. Unfortunately, this is due to bugs in Windows... and the only solution we came up with is the ability to hide statistics :-(
• Added import profile for WoodLAB files.
• Fixed an issue that, under certain circumstances, could cause optimization to never finish.
• Improved handling of large number of variants during optimization.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that might have led to the program’s failure during optimization when dealing with complex cutting layouts.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that could cause the project to be cleared when importing data.
• The optimization of cutting with a large number of identical, small pieces has been significantly accelerated.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• The method of strips cutting has been changed so that there is no need to limit the width of the strip.
• Added support for preferred size of reusable waste.
• Added support for stack cutting.
• Added option to enter a color of a piece.
• Identifier templates for 1D and 2D recyclable waste have been separated.
• The handling of priorities has been improved to increase the probability of using priority pieces on cuttings.
• The program now tries to arrange the pieces so that the reusable waste is as large as possible.
• The algorithm for determining cuts has been significantly accelerated.
• Fixed an error that could cause incorrect grouping of the same cuttings.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• The method of strips cutting has been changed so that there is no need to limit the width of the strip.
• Added support for preferred size of reusable waste.
• Stack cutting added.
• The handling of priorities has been improved to increase the probability of using priority pieces on cuttings.
• The program now tries to arrange the pieces so that the reusable waste is as large as possible.
• The algorithm for determining cuts has been significantly accelerated.
• Fixed an error that could cause incorrect grouping of the same cuttings.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Loading of large XLSX, XLS and ODS files has been accelerated.
• Fixed a bug that could cause the program to crash when loading huge XLSX, XLS and ODS files.
• Fixed a bug that could cause the program to crash when returning to the home screen.
• Fixed a bug that could cause ineffective grouping of pieces.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• The method of selecting the best solution has been changed to give more importance to the arrangement of pieces.
• Revised AI search accuracy to improve optimization speed.
• Default configuration profiles updated.
• Fixed an error that could cause pieces to not be grouped.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Added option to disable printing of cuttings containing only one piece. Instead, an additional table is printed containing a list of pieces and stocks from which these individual pieces should be cut off.
• Fixed an error that could cause the program to crash while printing.
• Fixed an error that could cause the program to crash when returning from the result screen to the main screen.
• Fixed an error that could cause the program to crash when opening the stock editing window.
• Minor visual errors corrected.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that could cause the program to crash when deleting stock items.
• The operation of selection lists for projects, material groups, devices and veneers has been sped up.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Several improvements have been added to enable faster handling of projects and stock:
  • Find stock for selected pieces - the option available in the list of elements sets the stock filter so that only stock items for material groups of selected pieces are shown;
  • Add stock for the selected material group - the option available on the list of pieces allows you to add stock for the material group of the selected piece;
  • Show stock from selected material groups only - the option available on the stock list sets the filter so that only items for material groups of selected stock items are shown;
  • Edit material group - the option available on the stock list allows you to go directly to editing the material group;
  • Create standard size - the option available on the stock list allows you to quickly create a standard size based on the selected stock item.
• The method of selecting the best solution has been changed to give more importance to the arrangement of elements.
• Revised AI search accuracy to improve optimization speed. AI is now enabled by default, so we recommend restoring your search profiles to their default settings.
• Fixed a bug that could cause the program to hang when adding/removing/importing pieces, when accepting a solution, or when returning to the home screen.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Speed up optimization when using AI.
• Fixed an error that could cause the preview to disappear in the results export window.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Speed up optimization when using AI.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Optimization using AI when there are a lot of stock items has been significantly accelerated.
• Fixed an error that could cause AI optimization to be very slow.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Optimization using AI when there are a lot of stock items has been significantly accelerated.
• Speeded up UI performance when there are a lot of pieces or stock items.
• Fixed an error that could cause AI optimization to be very slow.
• Fixed an error that could cause the program to crash when importing tabular data.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Default import profiles from PRO100 and Corpus programs added.
• Optimization of very large amounts of stocks has been significantly sped up.
• The program's operation has been accelerated when a large number of material groups and stocks have been introduced.
• Fixed a bug that could cause deterioration of optimization results when grouping and cutting length limitation were enabled.
• Fixed a bug that could cause the program to crash when closing.
• Fixed an error that caused standard sizes not to be saved after importing material groups.
• Fixed a bug in the backup procedure that caused column assignments to not be saved in import profiles.
• Fixed an error in the tabular data importer that could cause the program to crash in certain circumstances.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Added result grouping (see: Cutting.quantity)
• Optimization of very large amounts of stocks has been significantly sped up.
• Fixed a bug that caused incorrect loading of the element structure.
• Fixed a bug that could cause deterioration of optimization results when grouping and cutting length limitation were enabled.
• The version number of the Output object has been changed to 2.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Fixed an error that could cause incorrect reading of numerical values in specific circumstances.
• Fixed an error that caused numerical values to be saved with low precision.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that caused problems with editing projects and stocks after changing the dimensioning method.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that caused incorrect loading of slants of 1D pieces.
• Fixed a bug that prevented cancelled results to be re-optimized.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

• Fixed an issue with the installer that prevented the installation of examples in the server version of the application.

We are pleased to inform you about the new TonCut for Automation version. The new version includes the following changes:

We are excited to announce the first release of TonCut for Automation, a cutting-edge application that allows you to integrate cutting optimization into your systems. Whether you need to optimize your cutting plans for wood, metal, glass, or any other material, TonCut for Automation can help you save time, money, and resources.

With TonCut for Automation, you can use cutting optimization as a service in your own applications. You can choose to run it as a Websocket server or as a command line tool, depending on your needs and preferences. The API is very simple and easy to use - it is based on JSON, a widely used data format. You can send your cutting tasks to TonCut for Automation and receive the optimal cutting patterns in return.

To help you get started, we have prepared a comprehensive documentation that explains how to install, configure, and use TonCut for Automation. You can find it at https://docs.toncut.com. You can also check out our demo web application that uses TonCut for Automation to optimize cutting plans online. It is called TonCut Easy Online and you can access it at https://online.toncut.com.

We hope you enjoy using TonCut for Automation and benefit from its features. We welcome your feedback and suggestions on how to improve our product. Please contact us by using the contact form at https://www.codeton.com/support or by e-mail at support@codeton.com if you have any questions or issues.

Thank you for choosing TonCut for Automation!

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that caused incorrect arrangement of pieces when grouping was enabled and the material group forced a surplus or margin greater than zero.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could cause cuts to be calculated very slowly in some cases.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that caused the veneers not to be assigned when importing tabular data.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Tabular data import - added the ability to import multiple projects at once.
• Tabular data import - added the ability to import priorities of pieces and stock.
• Tabular data import - several errors have been corrected and some improvements have been introduced. In particular, the importer no longer requires the provision of information that is not needed, such as the default material group or the method of describing miter cuts when importing 2D materials.
• Improved handling of piece priorities.
• Fixed an error that caused a problem with importing stock.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed an error that was causing a problem with importing tabular data.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could cause the program to crash while accepting the solution or starting the optimization.
• Fixed a bug that could cause some settings to be incorrectly restored from a backup copy.
• Added a new feature that allows you to adjust the font size of text within the user interface for improved readability.
• Added the possibility to create templates from selected elements in the Projects tab.
• Added stock statistics.
• Added the possibility to filter pieces by material type (1D or 2D).
• Added the possibility to filter stock by material type (1D or 2D) and size type (standard, non-standard).

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Duplicating material groups, veneers and templates now available.
• Merging identical pieces now available.
• We fixed bugs that enabled adding pieces to completed projects.
• We fixed a bug that caused incorrect display of 1D diagrams.
• We fixed a bug that could cause problems with adding and editing pieces.
• We fixed the problem with copying pieces that were fully or partially used in optimization.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• We fixed a bug that could cause a problem with launching the program.
• We fixed an error that could cause the program to crash while accepting the solution.
• We have added veneer management support to KD Max plugin.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Handling multiple projects now available.
• Filtering pieces and stock now available.
• New best result criterion aimed at increasing the production speed at the expense of waste now available.
• We have modified piece statistics so that they are now displayed per material group.
• Significantly improved 1D optimization results.
• Significantly improved AI generated results.
• No more need to save optimization results.
• Bug that might occur when restoring the program status from a backup copy has been fixed.
• Bug that might cause the cuttings to be grouped incorrectly on the result printout has been fixed.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could cause a very long 1D material optimization time.
• Fixed a bug that could cause placing 1D pieces out of the material boundaries in specific cases.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Labels - an option added to select whether the piece orientation in the preview should be in line with the cutting or the input data.
• Fixed a bug that could make it impossible to export data from Microsoft Excel.
• Improved the look of the software under Windows 11.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could cause using too little stock.
• Fixed a bug that could cause assigning materials of incorrect thickness during data import.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Added templates for piece sets.
• Added the option to backup all data and program configuration.
• Changed the default operation of library data import so that no duplicate devices, material groups, and veneers are created.
• Added an option to fix the Microsoft Excel plugin.
• Added an option to optimize only selected pieces.
• When exporting the results to CSV files, an additional file containing all the cuttings is created.
• Fixed a bug in the CSV file importer that could cause incorrect interpretation of the data structure.
• Restored the option to export DXF for 1D materials.
• Removed an unpleasant sound when adding or removing pieces with the PLUS and MINUS keys.
• Improved identifier generators so that %L and %W tags use units selected in the configuration.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could cause early finishing of optimization.
• Fixed a bug that could cause misrepresentation of veneers on label printouts.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Added a plugin update mechanism.
• Fixed a bug that could cause the program to crash when starting optimization and prevent editing of pieces and stocks.
• Fixed a bug that forced you to enter a material group every time you added new pieces.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Fixed a bug that could make it impossible to load some results.
• Fixed a bug in the table data import window that could cause the misplacement of comboboxes specifying types of columns.
• Fixed a bug that could cause the program to crash when entering a material group name in the edit windows for piece and stock data.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• We have added support for miter cuts in 1D materials.
• We have added any optimization repeats without the necessity to cancel the optimization.
• We have added a high contrast mode for label printout.
• We have added the possibility to change font size in exported DXF files.
• We have changed element orientation on labels so that it is the same as on the cutting.
• We have improved and expanded the non-stock mode.
• We have corrected the error causing the wrong sequence of elements on 1D cuttings (algorithm without the miter cut management).
• We have corrected the error potentially crashing the program when starting optimization.
• We have changed the OEM license name to OFL.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• The handling of tabular data import profiles has been improved.
• The possibility to resize the tabular data import window has been added.
• The problem with the identification of standard 1D resource sizes has been fixed.
• The problem that could slow down optimization time (and generate worse results) with very large amounts of stock has been fixed.
• The error that caused problems with selecting more items in lists has been fixed.
• The error that prevented the import of tabular data if the number of imported items was not an integer has been fixed.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Option added to select the identification method for pieces in printed diagrams.
• Option added to select what dimensions (net, gross or cut) are to be displayed on piece lists (not applicable to printouts).
• Columns with net and cut dimensions added to exported CSV files.
• Corrected error resulting in wrong piece order on printouts.
• Corrected error potentially crashing the program after cancelling optimization results.
• Handling of damaged XLSX files improved.
• Text layout in printed diagrams improved for legibility.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• The error that may have caused the program to crash at the time of accepting the results has been corrected.
• The error that may have caused the resizing of program windows every time they were opened has been corrected.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Added stock identifiers.
• Added automated identifier generation for stocks originating from recyclable waste.
• Added the option to choose whether the program is to manage warehouse stocks or not.
• Added the option to save leftovers and waste to SSI files if the program is not managing warehouse stocks.
• Added prioritization of stocks.
• Added the option to select which material groups are to be included in optimization.
• Added the option to select which stock sizes (standard and/or recyclable waste) are to be included in optimization.
• Added the option to include a greater quantity of stocks in optimization than available in the warehouse.
• Significantly improved AI results.
• Added the option to filter, hide and delete results.
• Lists of orders and stocks are now sorted in the order of entry by default.
• Corrected an error sometimes causing the program to freeze during optimization.
• Corrected an error sometimes generating double cuts.
• Corrected an error sometimes causing the program to freeze while exporting stocks, after reloading them from the "Results" tab.

In the last couple of months we have gathered a lot of feedback from the users. Accordingly, we decided to change our development plans. In version 8.1 we plan to also add:

1. Full handling of projects/orders, i.e. grouping of order elements.
2. Option to filter elements of orders and stocks by material groups.
3. Option to confirm recyclable waste before it becomes a full-fledged stock.

Then we will start working on version 8.2, which will include a new algorithm for nesting rectangles and the option to group elements for compatible post-cutting structure.

Version 8.3 will include the option to optimize any shapes and support for diagonal cuts in 1D optimization.

Only after adding all these functionalities will we move on to network operation and other licensing methods.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Acceptance of the results — if the quantity of the material falls to zero, the material will be removed from the stock, as long as its size is not standard.
• Cancellation of the results — added removal of recyclable waste originating from the acceptance of canceled results.
• Added solution name in the results printing footer.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Corrected an error potentially causing wrong formatting values to be set for recyclable waste.
• Corrected an error causing problems with importing 1D elements and materials.
• Added a plugin for exporting cuttings to ArtSoft Mach 3 compatible files.
• Improved print legibility.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Corrected an error making recyclable waste not go to the storage.
• Corrected an error possibly resulting in wrong cutting sequence.
• Corrected an error resulting in wrong cutting orientation while exporting.
• Corrected an error possibly crashing the program while optimizing with AI.
• Improved print legibility.

Known problems (we are working on solutions):

• Problem with identifying stocks (missing ID).
• Problem with printing cuttings when there are too many elements.

We are pleased to inform you about the new TonCut 8 version. The new version includes the following changes:

• Added warehouse stocks support. Orders and warehouse stocks are both stored in the local database. This makes the program even easier to use.
• Added optimization history. Thanks to this, there’s no need to use SSI files anymore!
• Added an optimization algorithm using AI. Thanks to this, the program can find even better results. We plan to continuously improve our algorithms using AI and machine learning.
• Added a functionality for importing XLSX, XLS and ODS files directly in the program.
• Added an option to import material groups and veneers.
• Added one-click export of all cuttings.
• Added an option to set piece margins. In this case, the margin is the opposite of the surplus.
• Added support for bar codes - they can now be assigned to pieces and printed on the labels. We will also be adding support for QR codes soon.
• Fixed many minor bugs related to the way program works and its appearance.

Importantly, we updated the naming convention:

• Material is now called material group.
• Sheet is now called material.
• Sheet margin is now called formatting.
• Ornament is now called structure.

Plans for the future:

• Version 8.1 (July 2020) - new algorithm for rectangle nesting and an option to use the same data by all TonCut instances in the company.
• Version 8.2 (October 2020) - any-shape optimization.

For the time being, we continue to sell TonCut 7. We also priced it down. This is because TonCut 7 theoretically allows sharing data between many TonCut instances. TonCut 8.0 in its current form, despite its many advantages, unfortunately lacks this functionality. This problem will be solved in version 8.1.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• An e-mail address is required to activate the DEMO version.
• Fixed error that could have caused a wrong calculation of cuts. The consequence of this error was the lack of cut numbers on the printouts. The program could also understate the total number and length of cuts.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error that could cause problems with program start after it was updated.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Allow cuts on edges option is now unavailable if the minimum cutting width is greater than zero.
• Allow cuts on edges option is now also working for cuts inside the sheets, not just the edges.
• Fixed error which could cause suboptimal search results when using margins, kerf, optimal manner of cutting margins and cutting on edges was enabled.
• Fixed error which could slow down optimization when it referred to large number of very small pieces.
• Fixed error which could cause the program to crash if the number of sheets entered was very large.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error that could cause notifications about the new version of the program not being displayed.
• Fixed error that caused a problem with reactivation of the DEMO license.
• Fixed error which could cause the startup screen not to disappear when importing files directly from Microsoft Excel or from files specified on the command line.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Filtering results - filtering includes waste resulting from the kerf.
• Filtering results - we have added the option to choose whether usable waste should be considered.
• Configuration window - selection of dimensional accuracy is now more intuitive.
• DXF export - fixed error which caused the pieces to be positioned incorrectly if the rotation or the mirror image was used.
• PLT export - we have changed the way scale is defined. Now the resolution is given.
• Fixed error which could cause margins to be distorted when editing sheet data.
• We have improved support for working on multiple monitors.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• The program has been adapted to monitors with high resolution. It also correctly supports High-DPI mode in Windows 10.
• Error causing the printouts to occupy only a small part of the page has been corrected.
• We have significantly accelerated the algorithm for determining cuts.
• We have corrected the error which could cause occurrence of duplicate of materials, devices and veneers.
• We have corrected the error which could cause program suspension when adding standard sheet dimensions.
• DXF – layer with the description of pieces can be now printed.
• DXF – we added the possibility to change the name of layer with the described pieces.
• We increased the accuracy of statistics (length and surface) up to 3 decimal places.
• We have refreshed the look.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• New option has been added to determine what size (net or gross) is to be cut out.
• Thickness of a veneer can be zero now.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Default margins support has been restored. Now you can set the default margins for each material separately.
• Support for standard sheet sizes has been rebuilt. Now the standard sizes are set for each material separately.
• Tables on the printouts now contain gross dimensions.
• Labels now contain gross dimensions.
• Printouts have been optimized to make the best use of a sheet of paper. Tables can now change their position and width so that the sheet schema is as large as possible.
• Fixed error that could have caused the program to crash when trying to save the results if they were previously filtered.

Old plugins will not work with this version of TonCut. Please upgrade all plugins you use.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• A configuration wizard has been added. It adjusts the program settings to the needs of the user, industry and computer power. The wizard opens automatically when you start the program for the first time. It can also be opened manually in the optimization profiles window by pressing Restore defaults.
• Optimization acceleration. In some cases, optimization can be up to 50 times faster. In particular, it refers to optimization of 1D materials and 2D when there are many sheets optimized.
• Fixed error that could cause the program to crash on computers with more processor cores.
• Fixed error that resets IDs of added pieces and sheets.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• CSV import: added option to indicate if the dimensions are gross or net.
• CSV import: if material thickness is available, the list of materials only shows the matching ones.
• CSV Import: fixed error that could cause the program to crash if one of the materials was not assigned.
• CSV Import: fixed error that could cause the program to crash if one of the dimensions was not a correct number.
• The list of pieces shows gross dimensions now.
• The Start button is always active now.
• Fixed error in the piece data window that caused a wrong dimension calculation if the units used were different than millimeters.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Option to enter dimensions of a piece as net or gross value.
• Fixed error that allowed creating many devices, materials and veneers with the same name.
• Fixed error that could cause incorrect assignment of the materials to the devices during import (of materials and devices) from the SSI file.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Veneers - veneer thickness added.
• Veneers - information on the material thickness has been added.
• Printouts - in order to increase visibility, the veneers are now marked in blue.
• At the first installation, the program configuration is now matched to the speed of the computer.
• Option to restore default search profiles has been added.
• Fixed error that could have caused a wrong calculation of cuts. The consequence of this error was the lack of cut numbers on the printouts. The program could also understate the total number and length of cuts.
• Printouts - fixed error that caused lack of dimensioning of the main cuts if the sheet had margins.

Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Support for 1D materials.
• Completely new result printout:
  • we have corrected the problem with the mirror image of the outline,
  • better use of space depending on whether we print horizontally or vertically,
  • highlighted information about the number of copies of a given sheet.
• Option to change best result criterion.
• Option to change order of printout of labels.
• Limitation of cut length and width as separate device parameters - limitation of a strip width useful when cutting in strips.
• Completely new sheet data window.
• Information about consumption of materials and veneers on the results screen.
• We have arranged the statistics on the printouts and in the program.
• We have removed the results summary printout.
• Option to turn off the surplus in material parameters.
• We have added protection against the loss of entered data.

Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• We have improved the formula for assessing solutions so that it takes into account not only the size of waste, but also the recyclable waste and area of the used sheets.
• Label printing - labels are drawn even if they do not fit on the page.
• We have added dimensions of sheet below its preview.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed compiler error that could cause the program to crash on computers with more computing power and/or more processor cores.
• Assignment of sheet margins has been fixed. The left/top/right/bottom orientation now refers to the position of the sheet in which the length is horizontal and the width is vertical.
• Margin control on data import from CSV files was added.
• Fixed error that may have caused some dimensions of the main cuts to be missing on the printouts.

NOTE: margins assignment change applies to the Bottero 352-BCC and Schneider Electric NUM 1020 plugins. Please upgrade them to the latest versions.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Minor modifications for compliance with GDPR.
• Various minor fixes.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Plugin for Microsoft Excel for quick data export directly to TonCut.
• CSV import - added support for veneering..
• CSV import - added option to create new materials at the import stage.
• CSV import - default separator has been changed from a semicolon to a comma.
• DXF export - fixed wrong piece identifiers on description layer.
• Fixed error that caused the program to run very slowly if there were a lot of items on the list of pieces or sheets.
• Fixed error that caused opening XLSX files by the CSV import plugin. Now the file will be opened by the KDMax plugin.
• Fixed error that caused the error reporting window to have no translated texts.
• Label printing - information about paper size has been added in the Options window.
• Information on the materials has been added to "No result found" dialog box.
• Many other alterations and improvements.

Old plugins will not work with this version of TonCut. Please update all used plugins.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Piece priorities - we have changed the formula for assessing the results so that all of the results containing all the pieces with the critical priority are always rated higher than the others.
• DXF file export - file format has been changed to R15 (AC1015), i.e. the version supported by AutoCAD 2000-2003.
• DXF file export - non-printable layer with descriptions of pieces was added.
• DXF file export - option to export pieces and waste as rectangles has been added.
• Label printing - added option to change margins and line spacing.
• Printing of results - visual information showing ornament has been added to the diagram.
• Results preview - pieces with high and critical priority are marked in orange and red.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• We have added an option to disable graphic marking of waste on printouts. This option was added because of some computers / printers print uniform black surface instead of diagonal lines.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error causing wrong order of cuts. The problem was occurring when cuts from the edge to the edge was turned on and cutting in strips was turned off.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error that caused excessive memory consumption which could cause the program to crash.
• Fixed error that could slow down the program response during optimization.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error that could cause wrong numbering of the cuts on the printout.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Printout of results - added option to switch on the numbering of the cuts.
• Printout of results - added option to switch on dimensioning of the main cuts.
• Printout of results - waste and usable waste are now visually marked.
• Printout of results - we have changed the way how sizes, id and description of the pieces are arranged.
• Printout of results - other minor visual alterations.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error in the installer that caused extra plugins to install in the wrong place. As a result they were not available in the program.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Added option to hide all label elements, including piece preview.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed problem with saving SSI files with the remnants after optimization.
• Other minor alterations.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed problem with exporting cuts to PLT, HPGL and DXF files. The problem was occurring only when the sheet was rotated.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Added support for veneering.
• Significantly accelerated calculations. In particular, this is visible on the computers with multiple processor cores. In the case of one core, the acceleration is about 10%, but with four cores the program calculates 5 times faster. With default settings, this acceleration can translate into larger number of verified combinations - the optimization time can be even longer. That is the nature of our optimization algorithm. To reduce the optimization time, change "Dynamic change method" option to lower value - we recommend setting its value according to the number of processor cores:
  • 1 core - 15 seconds,
  • 2 cores - 8 seconds,
  • 4 cores - 4 seconds,
  • 8 cores - 2 seconds.
• Improved readability of the printouts.
• Completely rebuilt label printouts.
• Fixed error causing duplicating materials and devices when loading data from SSI files.
• Completely rebuilt piece adding and editing window.
• Fixed very rare error that caused the need to re-activate the program on some computers.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error which caused program crashing if there were no default printer selected in the operating system settings.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed: minimum cut width sometimes is not saved when editing device settings.
• The HPGL/PLT plugin was separated into two: PLT and HPGL.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error that prevented adding data from SSI files.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed: Incorrect number of sheets when saving leftovers.
• Fixed: Importing CSV does not work for text files using UTF-16 format.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Fixed error causing wrong dimensioning in DXF files.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Added option to export results in DXF format.
• Fixed error that could cause problems when loading SSI files.
• Fixed error that could cause problems when importing data from CSV files.
• HPGL files support has been improved.

We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

• Support of multiple materials.
• Support of multiple cutting devices and taking into account their limitations during optimization process.
• CSV file import - added support of different types of encoding, e.g. ISO-8859-2, UTF-8, etc.
• CSV file import - the importer of CSV files has a form of a wizard now, so it has more possibilities and is easier to use.
• Added option to define surplus.
• Added option to change ornament of many pieces simultaneously.
• Added option to change material for many pieces simultaneously.
• Printing labels - added option to hide identifiers of the pieces.
• Facilitation in adding pieces - now when adding the pieces, some fields are automatically filled in. As a result, the process of manually entering data can be even faster.
• Added information on the quantity of the pieces and sheets on the main screen.
• Printouts - added information about the number of pieces and sheets.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Increased sheet margin limit from 20 cm to 5 m.
• Fixed error during the CSV file import which caused problem when sheet margins are set to zero.
• We have changed name of the "BOX" license to "FLX".

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Fixed error that could cause a crash of the program at start-up when the Internet was not available.
• Fixed error that forced the program to restart after the license activation.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Added option to assign one of the three priorities to the pieces: normal, high or critical. The higher the priority, the more likely that the piece is included in the optimization results.
• Added option to filter optimization results in terms of volume of waste.
• Unused pieces automatically gain higher priorities, while saving leftovers.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• CSV files import: added option to import dimensions in meters.
• CSV files export: added option to export overall statistics.
• CSV files export: added option to export information on the piece usage on sheets.
• Fixed: application can crash during optimization when there are many relatively small pieces.
• Fixed: problems with the license keys handling.

We are pleased to announce the implementation of our latest TonCut plugin which allows to import pieces from KD Max software.

KD Max is a world's leading software for professional kitchen, kitchen furniture, cupboards design and for creation of photorealistic interior visualizations. Thanks to the integration with TonCut, it has become enhanced with advanced cutting optimization technology for flat materials, such as wood, stone, glass, cardboard, aluminum. The cooperation of KD Max and TonCut is a great news for all the kitchen designers, furniture designers and manufacturers. More information about KD Max software can be found on www.kdmax.pl.

website. The plugin can be downloaded from Extensions section of TonCut website.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Cut depth limit - added Include sheet margins option, allowing to include margin cut-off while calculating cut depth. In the earlier versions, the program calculated it as this option was switched on. Now it is switched off by default.
• Fixed error with license key handling while the program is activated with the administrator account and used by other user.
• Minor alterations.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Added information on number and length on the printouts.
• Changed method of statistics being displayed on the printouts.
• Added unit type selection for cut length in the statistics.
• Supplemented information about the selected search configuration in the main window.
• More accurate information is displayed now when the program cannot find any proper results.
• Accelerated handling of cases where the program cannot find any proper results.
• Fixed: Problem with maximum cut depth handling.
• Fixed: Problem with license activation in English version of the program.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Fixed: The "from large to small" sheet selection order does not work.
• The maximum number of tasks is now selected automatically based on the complexity of the task and the amount of the computer's memory.
• The minimum threshold for adaptive sheet order change has been lowered from 10% to 5%.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Fixed: Add, Remove and Change buttons are invisible.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Fixed: The program may crash when there are no results found.
• Fixed: The program displays multiple information windows when no results are found.
• Fixed: The main window of the program does not fit in on the low-height screens.

We are pleased to inform you about the new TonCut 6 version. The new version includes the following changes:

• Adaptive order sheet changing to minimize waste - the program changes the order of the sheets during optimization so that the waste of a single sheet does not exceed the predetermined size.
• Extended options to define sheet order.
• Global optimization to optimize all the sheets:
  • Forking - algorithm developed together with scientists of West Pomeranian University of Technology.
  • Adaptive optimization - method based on multiple repetition of optimization in order to place problematic pieces to the first sheets.
• Use the full power of your computer thanks to multi-threaded optimization.
• Improved support for devices with cut depth limit.
• Limitation of cutting length for devices of "guillotine" type.
• Alterations to the optimization algorithm to increase the range of checked results.
• New licensing system - option to buy time limited, short- and long-term licenses.
• New logo :-)

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Fixed: Problem with vertical shift of side panels (Windows 8) when Paseczek is in "always on top" mode.
• Fixed: Problem that may cause waking a computer from sleep/hibernation.
• Fixed: The auto show feature doesn't work when there are new messages to display.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Printing results » Piece summary table - Added option to show column with page numbers, on which specific pieces can be found.
• Fixed: Some key short-cuts are working when they should be disabled. It may lead to unpredictable effects, including application crash.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Printing results » Sheet summary table - Added option to show a column with page numbers, on which specific sheets can be found.
• Fixed: The rows in the tables on the printout can sometimes be higher than they should be.
• Fixed: Wrong ornament presentation on the printout.
• Fixed: Sometimes at the beginning of the optimization, the preview shows results from the previous optimization.
• Fixed: The program does not remember last selected configuration profile - every time the program is started, it sets configuration profile to Current.
• Fixed: The first column in the text/CSV file import is too narrow.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed: Incorrect handling of an ornament along the length.
• Fixed: Possible crash if table does not fit in on one page of the printout.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• We have added an option to print only summary of the optimization results - without the diagrams. This feature can be particularly useful for the users who use TonCut to optimize one-dimensional materials. This option is available via the keyboard shortcut Ctrl+U or in the application menu under File » Print summary.
• We have added an option to select active optimization profiles.
• We have added information about the number and length of the cuts - the information is displayed below the statistics, only after the optimization is finished.
• Fixed: TonCut finds no results (or weak results) when using pieces with ornament along the length.
• Fixed: Sometimes the optimization result printout contains one blank page just after the initial list of sheets and pieces.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed: CSV file import accepts negative values of width, length, quantity and margins.
• Fixed: When a large amount of sheets is calculated in a short time, the user interface does not work as it should.
• Fixed: Program crashes when one of the search profiles cannot find any result.
• Fixed: The progress of optimization information appears only after finding the first result.
• Fixed: Optimization runs for sheets that are too small to fit in the smallest piece.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed: Wrong sheet preview after loading file with the optimization results.
• Fixed: Some printer drivers could cause the program to crash when printing is cancelled before it really starts.
• Fixed: The installer was creating wrong entries in the system registry.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Problem with pulled out descriptions of messages when Paseczek works vertically has been fixed. The problem could have caused program's crash.
• Problem with channels without titles has been fixed. Paseczek marked them as inactive.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Fixed a problem with pop-up descriptions of messages when Paseczek is working vertically. The problem could cause crash of Paseczek.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Errors related to key short-cuts support have been fixed.
• Error that could have caused crash of the program when key short-cuts were used on the result screen has been fixed.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Error preventing registration of program has been fixed.
• Error appearing when the program cannot find any result has been fixed.
• Error handling has been improved.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• We have completely rewritten popup message descriptions. Now they look better, open smoother and work properly on Windows 8.
• We improved the installer to enable installation without administrator privileges.
• We fixed the bug which could have cause problems with starting Paseczek on some computers ("Failed to load the default skin!").

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Google+ support added.
• Facebook support added.
• Visual changes in message preview window.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Some optimizations for better performance.
• Error causing crash of the application (while opening configuration window) has been fixed.
• HTML tags handling in messages' titles has been improved.
• Problem with automatic hiding (only on Window 7) has been fixed.
• Direct2D - optimization for better performance.
• Direct2D - problem with black stripe during showing or hiding Paseczek has been fixed.
• Direct2D - rendering method has been added to configuration window.
• Direct2D - background drawing (when skin is in use) has been fixed.

Unfortunately, Direct2D method did not give us desired effect. Still, using Graphics32 and Direct3D with Windows 7 gives better performance. Perhaps, however, it depends on a computer. Check it, maybe Direct2D will have better efficiency than Direct3D on your computers.

Direct2D method does not use Graphics32 so, texturing and text smoothing does not concern it. It won't change because of weak (read: slow) textures handling in Direct2D.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Graphics stuff was rewritten to rely on Graphics32 library. Thanks to that we have now:
  • reduced CPU load,
  • properly looking pictures and icons with translucency,
  • optional texturing of texts, thanks to which CPU is less loaded,
  • font smoothing,
  • problem with performance of translucent pictures' drawing disappeared.
• We added new tab in configuration General » Appearance » Rendering where you can choose the method of rendering and specify additional options.
• Minor error related to translucency animation of Paseczek window, has been fixed.
• Because of a Windows 7 64bit bug, Paseczek sometimes cannot handle the mouse wheel. As a result, the content of Paseczek was disappearing. Now, the content of Paseczek does not disappear, but unfortunately nothing else happens... despite of showing short info.
• We added new method of rendering: Direct2D. For now, it can be run only by starting Paseczek with the -renderingMethod 2d2 parameter. It is because we have to add much more optimization in order to reduce the load of CPU.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Error causing strange content of tables with pieces and sheets visible on the right side during searching has been fixed. The error could cause the program to crash.
• Statistics have been added to the resultant files in CSV format.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Error related to translucency and automatic hiding, have been fixed.
• Global hotkeys handling on Windows Vista, Windows 7 and Windows 8, has been fixed.
• Error related to mouse transparency has been fixed.
• Error related to dropping links on Paseczek has been fixed.
• Automatic showing of Paseczek has been fixed.
• Automatic hiding of Paseczek has been fixed.

We are pleased to inform you about the new Paseczek for Business version. The new version includes the following changes:

• ExtJS updated to version 3.2.1.
• Validity periods handling has been improved - time zones.
• JSON handling has been improved.
• Possibility to filter lists and dictionaries in the Administration Panel has been added.
• Error of HTTP server causing crash of the service has been fixed.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Added option to set two minimum dimensions (width and length) in the recycle criterion.
• Added option to sort lists of pieces and sheets, and reorder the columns.
• Added option to search pieces and sheets (CTRL+F).

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Bug while showing message description popup, has been fixed.
• Added support for description texts that do not contain space characters, e.g.: Chinese.
• Fixed scrolling bug that appeared when option Stop immediately was activated.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Bug that blocked installation of graphic arrangement has been fixed.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Error that caused overload of CPU when Paseczek did not have any messages to display, has been fixed.
• Graphic arrangements support has been turned on.
• Other small changes and improvements related to the change of compiler to Delphi XE2.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed error related to standard sheet sizes.
• Fixed error that could cause program crash during search process.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Added setting of any ornament option for pieces.
• Added option to select final row while importing text or CSV files.
• Fixed error that caused different pieces or sheets to have the same id.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• The way to set proxy server has been changed to be like in Google Chrome. Paseczek uses now only system settings.
• HTTPS protocol support added.
• Error that could have caused problems with reading some RSS channels, e.g.: filmweb.pl, has been fixed.
• Error that generated wrong URL addresses if they included colon, e.g.: Wikipedia, has been fixed.
• Error related to showing notifications that could have caused different effects including crash of Paseczek, has been fixed.
• Closing Paseczek has been sped up to disappear immediately.
• Little memory leaks in ControlAPI have been fixed.
• Installer has been improved to enable program installation without administrator's authorization.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Fixed a bug that caused the settings changes were not saved.

We added possibility to choose rendering method. It is possible from the command line level temporarily. In order to choose other than default rendering method start Paseczek with following parameters:

• Direct3D - C:\Program Files\Paseczek\Paseczek.exe -renderingMethod d3d
• GDI - C:\Program Files\Paseczek\Paseczek.exe -renderingMethod gdi
• DrirectDraw - C:\Program Files\Paseczek\Paseczek.exe -renderingMethod ddraw

We experiment with many methods because of Window 7 CPU overload. What at Windows XP takes 0-2% CPU, at Windows 7 can take even a dozen or so percent! For the time being - no success. Recently added method based on DirectDraw turned out that is worse than GDI. Next technology to try is Direct2D.

At Windows 7 the default rendering method is Direct3D. It is because only in this way we succeeded in getting fluent animation. It looks that Windows 7 (DWM precisely) does not run in real time - that is why both GDI and DirectDraw methods are not able to provide smooth animation.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Error in configuration wizard that caused it was not possible to complete the configuration, has been fixed,
• Problem with remembering the size of Paseczek has been solved,
• Problems with backward compatibility have been solved - loading history and configuration file (*.tcfg),
• The delay effect while moving headlines on Windows 7 has been fixed,
• Default setting has been changed - stop scrolling when the cursor is above the message title,
• Default setting has been changed - mark the message as read when the short description window is opened.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed error related to waste calculation.
• Improved printer handling to remember its last settings.
• Improved printer handling, so that the program cooperates with all label printers.
• Fixed minor errors in the CSV and text files import plugin.
• Added search profile copying feature.
• Added option to restrict cutting method, so that the final optimization result meet the cutting device requirements.
• Accelerated and improved algorithm for selecting best cuts.
• Added information panel that is helpful for cost calculations.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Smooth animation on all of the Windows systems,
• Windows Vista and Windows 7 support,
• Easy and legible configuration wizard,
• Atom 1.0. support,
• New catalog of news channels,
• Showing descriptions in popup windows, when mouse is over message's title,
• New functionalities related to automatic hiding - e.g.: ignoring mouse clicking when Paseczek is translucent,
• Automatic hiding mode has been extended with option "Show when there are new messages",
• Arrangements (skins) support - we will enable arrangements and a new application to create them soon,
• Chromium embedded browser is used to show message preview instead of Internet Explorer.

Well-known problems we're working on:

• Paseczek at Windows 7 takes too much CPU time,
• Catalog of news channels (Chromium) has problems with drawing icons.

We are pleased to inform you about the new Paseczek for Business version. The new version includes the following changes:

• Error causing application crash during sending a large number of data to Paseczek, has been fixed.
• Active Directory: user group handling has been fixed.

We are pleased to inform you about the new Super Szklarz version. The new version includes the following changes:

• Minor alterations.

We are pleased to inform you about the new Paseczek for Business version. The new version includes the following changes:

• Error causing application crash while closing, has been fixed.

We are pleased to inform you about the new Paseczek for Business version. The new version includes the following changes:

• The first version of Paseczek for Business!

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Export of results to PLT (HPGL) files.
• Compatibility with Windows 7.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Data and results export to CSV files compatible with Microsoft Excel.
• New configuration options allowing to select the way of determining cuts.
• Printouts - improved text printing to make it always readable.
• Minor algorithm fixes improving speed and quality of results.

We are pleased to inform you about the commencement of cooperation between Codeton Software with Polkomtel S.A..

Under the name Informator, Paseczek has become a part of a new version of iPlus manager joining the elite group, represented by such brands as iPlus, Gadu-Gadu or Kaspersky.

iPlus is an offer of a mobile access to the Internet available in Plus network. iPlus range covers over 99% of the Polish population. Super-speed 3G/HSPA data transmission technology can be used in nearly 1500 cities, so iPlus offers the largest range of mobile Internet among all the operators in Poland. Last year, iPlus won in three independent tests of the Internet services offered by mobile operators in Poland that were organized by Audytel S.A., the editorial team of the 'Computer World' magazine and telecommunication portal Telix.pl. According to the tests, iPlus provides the fastest access to the Internet in Poland.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Display of texts on the printouts - now they are always readable.
• Plugins - fixed some minor errors in the plugins handling.
• Fixed error which could crash the application if the sheets had margins set.
• Improved search algorithm to give even better results.
• Fixed few minor errors in the CSV/text files import plugin.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed error occurring while working with very big pieces and sheets.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Integration with the Firefox browser, i.e. setting Paseczek as default RSS reader,
• The quality of scrolled text on flat monitors has been improved,
• New catalog of news channels,
• Flash type attachments (e.g. YouTube) support added,
• OPML protocol support added,
• Support for links beginning with rss:, feed: and opml: has been added,
• Few errors have been fixed.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Few minor changes that may improve work comfort.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed error that could cause printing problems under Windows Vista.
• Added new search profiles.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Error causing crash of Paseczek has been fixed,
• Error causing "empty Paseczek effect" has been fixed,
• Optional configuration of mouse has been added,
• Functions of left and middle mouse button have been exchanged,
• Option to mark messages as read in the preview window has been added,
• Possibility to choose channels from catalog in the configuration window has been added.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Results printing - page margins can be set with ¹/₁₀ mm precision.
• Labels printing - page margins, size of the labels and spaces between then can be set with ¹/₁₀ mm precision.
• Text files import plugin - improved default ornament handling.
• Updated help application.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Results printing - printouts have been complemented with reusable waste sizes.
• Labels printing - added labels printing feature for reusable waste.
• Text files import plugin - added option to ignore incorrect rows.
• Text files import plugin - added option to change default ornament.

We are pleased to inform you about the commencement of cooperation between Codeton Software with Web². The immediate result of this cooperation is an ActiveX control enhancing functionality of Biznes.net portal. We also expect the cooperation for the development and promotion of the Paseczek application.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Improved clarity of the printouts - sizes, piece numbers and their descriptions never overlap each other.
• Fixed error which could cause the application to ignore sheet selection order under certain circumstances.
• Accelerated and improved search algorithm.

We would like to thank Mr. Krzysztof Broniak for help and patience during solving problem that we couldn't find for many months. Paseczek didn't display anything on some computers - there was a blank window. The correction will be available in the next version which we hope to present very soon .

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• The program can load RSS channels from local files,
• Pictures handling has been fixed and improved,
• Program stability has been improved,
• Possibility to save and read configuration to and from a file has been added,
• Paseczek works with Windows Vista,
• Paseczek draws its own frame around the window. Owning to this fact, the frame has the same color as Paseczek,
• Installer closes Paseczek while updating to a new version.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• MSXML6 has been added back to installer,
• Error while drawing vertical pictures has been fixed,
• Error while working in automatic hiding mode that could have caused Paseczek stopped showing information has been fixed,
• The mechanism checking if the Paseczek does not take too much CPU time while transparency is turned on has been added. If it loads the system too much, transparency is automatically deactivated.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Animated GIF handling has been added on customers' request,
• Translucency has been added on customers' request; Paseczek can be translucent (WARNING: it heavily overloads the CPU, the bigger window of Paseczek is, the slower other programs will work. High overload of CPU is not our fault... it's how it works with Windows. We do not recommend it for slow CPUs),
• Other ports than 80 work now (e.g.: http://any.address.pl:2313/channel.rss),
• Bug that could have caused blocking Paseczek while downloading files - when there is no Internet connection, has been fixed,
• Automatic detection of the XML encoding - in case it is not given in XML prologue,
• Fixed the bug causing constant tries to download RSS files with errors - i.e. if the RSS file contains an error, Paseczek is still trying to download it every now and then, but not so often.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Bug that could have caused blocking Paseczek while downloading files, has been fixed,
• Bug that caused giving wrong numbers in Channels tab of configuration window, has been fixed,
• On customers' request Channels tab has been moved lower in the menu of configuration window,
• On customers' request possibility to change color of Paseczek's background has been added.

We are pleased to inform you about the new TonCut 5 version. The new version includes the following changes:

• Fixed minor errors in the labels and results printing.
• Improved labels printing by enabling diverse sizes, colors and font styles for the texts printed on them.

We are happy to inform that we were distinguished by the service INSTALKI.pl for high quality software creators. It is very nice for us because our main goal is to create high quality applications. Thank you very much for the distinction.

INSTALKI.pl service originates in February 2004. It is now one of the biggest services dealing with software in Poland.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Bug that could have caused crash of Paseczek when there were non-existent or defected channels on list of RSS sources, has been fixed,
• Bug that caused incomplete file downloading (e.g.: pictures), has been fixed,
• Bug that caused constant increase of memory related to incorrect usage of history, has been fixed.

The CHIP magazine wrote about Paseczek in no 11/2006 giving it the maximum points. We are grateful for the appreciation of the unique features that are special for us. We hope that further development of the program will be appreciated as well.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Mouse wheel support added,
• Bug that caused checking for the new version every 10 minutes, has been fixed,
• "Mark channel as read" option added (in menu and in configuration window),
• "Mark all messages as read" option added (in menu and in configuration window).

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• Many screens support added,
• Critical error that could have caused crash of the program just after its start, has been fixed,
• Possibility to change the sequence of RSS sources what changes the sequence of displayed messages,
• Installer error that caused mixing or loosing additional parameters of RSS sources (e.g.: refresh rate).

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• We have fixed Opera support. Unfortunately, the newest Opera has an error that causes not opening the websites including a comma in their address. We reported the error to the manufacturer... now we have to wait.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• We have corrected the critical error that could have caused crash of the program during downloading files.
• Additionally, we have added few new RSS channels.

We are pleased to inform you about the new Paseczek version. The new version includes the following changes:

• We have fixed bugs related to the "always on top" option.